Download Center > Maintenance > Rubber Flooring (Roll)
Deliberate and periodic maintenance of the flooring material is required to maintain its shape and quality. To keep the floor in optimum condition, follow the maintenance guide provided on this page.
1. Initial maintenence after installation
1) Vacuum dust or pollutants from the floor after installation.
2) Pour and spread a mild (neutral) liquid detergent (diluted to the recommended concentration) over
the surface and allow it to soak the floor for 5~10 minutes.
3) Wash the floor thoroughly with a nylon brush or buffer.
4) Wet-vacuum or soak up and wipe away the remaining detergent with a mop and/or towels.
5) Be sure to dry the floor thoroughly to prepare for waxing.
6) Apply the recommended wax 2~3 times to keep the floor in its best condition.
2. Routine / periodic maintenance
3. Recommended maintenance agents
Neutral detergent |
CAN DO (Ultrachem ) |
FORWARD (JohnsonDiversey) |
Wax |
EXQUISIT (Ultrachem) |
Complete (JohnsonDiversey) |
Remover
|
Ultra Strip (Ultrachem) |
Step-off (JohnsonDiversey) |
4. Caution!
- Buffer: 150~350RPM (RPM of 350 or higher may damage the product.)
- Explosure to strong acid, strong alkali or oils may discolor or deform the product.
- Recommended brush and pad: Soft nylon brush, white & red pads
- Insufficient rinsing after washing may discolor the product.
- Be sure to follow carefully the instructions of the manufacturer's products.
- If you consider using any product other than those recommended, test the product first on a small out
of the way section before applying it to the entire floor.
|
|
|
|