- You can use ordinary cleaning tools and detergent to keep Purgotex in good condition.
- After cleaning the product with detergent, make sure to wash off excess detergent with a large amount
  of water. (Residual detergent accounts for a considerable portion of industrial pollution.)
- Install a dust mat at the door, which is normally heavily exposed to contaminants.
- Vacuum-cleaning: Use a vacuum cleaner with a brush to clean the carpet.

Periodic maintenance

- Water-cleaning is required for places with heavy pedestrian traffic or where hygiene is a priority.
  Water-cleaning can be done at longer intervals for other places.
- use a copious amount of water for effective cleaning. The detergent must be mixed to its
  recommended concentration.

Bonnet buffing Cleaning - A method of cleaning carpet mainly on the surface. With this method you spray small   amounts of water on the surface and apply detergent at the same time, then you   vacuum the water with a suction vacuum cleaner designed for this purpose. This   method prevents water or detergent from sinking deep inside the carpet. - Bonnet buffing can be done in a short period of time, and keeps the carpet dry. You   can use the carpet right after cleaning.

Wet cleaning - With this cleaning method you use a large amount of water and detergent and wait   until the contaminants are soaked in the water. Then you use a polishing machine to   wash carpet fibers hard. - Wet cleaning is used in places with heavy contamination or regardless of the   contamination level. You can even clean fibers at the root of a carpet, and therefore   you may use this method for thorough cleaning. - Because a large amount of water is used, you should be careful to use wet   cleaning in places with poor waterproofing.